How to Check BLE connectivity using nRF Connect App (iOS) : SmartTerra Support Portal

How to Check BLE connectivity using nRF Connect App (iOS) Print

Created by: Suri M.kool

Modified on: Mon, May 17, 2021 at 10:18 AM

If you are having trouble connecting to the app. Please download the following utility to check and see if the Bluetooth BLE is functioning properly.

Steps:

1. Download and install "nRF Connect" from the App Store

2. Start the app and press "Scan" and wait until it's done scanning.

3. Locate the device that begins with "SMT_xxxxxxxxx" (Should see one after scan)

4. Press "Connect" to see if you can connect to it.

5. If you can then the SmartTerra BLE is working ok

Suri is the author of this solution article.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk